CMW Trucks - 1947 - 1972 Chevy Truck Parts



 

Share |

 

Discontinued - 350 HO Deluxe

Complete from top to bottom, the Chevy crate engine 350 HO Deluxe comes pre-assembled with the , carburetor, water pump, and distributor. It offers you an incredible performance value — one that delivers big-time performance without costing you big-time money. Carb, intake and distributor are included, but not installed.

NOTE: Intended for pre-1977 street vehicles and all off-road vehicles. Not intended for marine use.

Possible Applications*

  • Replace that V-6 with some all-American V-8 350 crate engine muscle
  • Restore your musclecar with a little bit more than stock

*Applications have not been validated. They are merely suggestions of how you might enjoy your GM Performance Parts crate engine. Some applications may affect engine warranty. See specific warranty information. Some applications may not be emission legal; check state and local ordinances.

ZZ4 350 Turn-Key TECH SPECS:
Part Number: 12496968
Engine type: Chevy small-block V-8
Displacement (cu in): 350
Bore x stroke (in): 4.00 x 3.48
Block (P/N 10105123)): Cast iron with 4-bolt main caps
Crankshaft (P/N 14088526): Nodular iron
Connecting rods (P/N 10108688): Powdered metal steel
Pistons (P/N 12514101): Cast aluminum
Camshaft type (P/N 24502476): Hydraulic flat tappet
Camshaft lift (in): .435 intake / .460 exhaust
Camshaft duration (@.050 in): 212'c1 intake / 222'c1 exhaust
Cylinder heads (P/N 12558060): Vortec iron; 64 cc chambers
Valve size (in): 1.94 intake / 1.50 exhaust
Compression ratio: 9.1:1
Rocker arms (P/N 10089648): Stamped steel
Rocker arm ratio: 1.5:1
Water pump (P/N 88894341): Cast iron, long-style
Flexplate (P/N 14088765): 14"
Recommended fuel: 92 octane
Ignition timing: 10'c1 BTDC @ 700 rpm
Maximum rpm: 5500

Chevy Performance 350 HO Deluxe Crate Engine

Part #:12496968


dyno image

Installation Notes

  • Comes with counterweighted flexplate for automatic transmission; requires counterweight flywheel for manual transmission.
  • Has right-side oil dipstick.
  • Intended for pre-1977 street vehicles and all off-road vehicles.
  • Not intended for marine applications.
  • Some assembly required.